Busbar Processing Machines

3/8" x 4-1/2" (10 x 120 mm)

Easily portable for field use. Pump is quickly removed from stand (other voltages available)

Optional tooling for crimping cable lugs

Simple 230-volt single-phase electrics

Supplied with the following round punch/die sets:

7 mm  (suitable for 1/4" bolts)

9 mm   (suitable for 1/4" and 7/16" bolts)

12 mm  (suitable for 3/8" bolts)

14 mm  (suitable for 3/8" and 1/2" bolts)

Other round sizes available

Easy punch/die changing

Punching Guide plus 3 sets of punching templates for
rapid punching of 4 hole patterns
(other styles and shapes available)

Bending angle indicator with adjustable stop control

Support stand for cutter area

foot pedal control Adjustable stops for setting bar length when cutting and bending
Includes hydraulic pump system and foot pedal control

Show Less

A complete cut, punch and bend system for material to: 1/2" x 4-1/2" (12 x 120 mm)

On wheels for easy movement

220/440 volt 3 phase 3 HP motor

Supplied with:

7 mm  (suitable for 1/4" bolts)

9 mm   ( suitable for 1/4" and 7/16" bolts)

12 mm  (suitable for 3/8" bolts)

14 mm  (suitable for 3/8" x and 1/2" bolts)

Round punch/die sets

Other round sizes available

Easy punch/die changing

Punching Guide plus 3 sets of punching templates for rapid punching of 4 hole patterns (other styles and shapes available)

Bending angle indicator with adjustable stop control

Support stand for cutter area

Adjustable stops for setting bar length when cutting and bending

Includes hydraulic pump system and foot pedal control
Optional tooling for crimping cable lugs and bending tools for ground straps

Show Less

"Three in One" fabricating machine Simultaneous Cut - Punch - Bend with capacity to 1/2" x 6" (12 x 150mm)

PLUS numerous optional tools to produce ground/earth straps in a single pass plus crimping tools for cable

Three separate work areas
No need for changing heads
Three foot pedals, plus manual push button control
Three phase power required
Fast quiet operation

OPTIONS:
Round and Oblong punch sets. Special bending (forming) blocks to produce single or dual bends for ground links Crimping dies for cable lugs

Show Less

"Three in One" fabricating machine Simultaneous Cut - Punch - Bend with capacity to 5/8" x 8" (15 x 200mm)

PLUS numerous optional tools to produce ground/earth straps in a single pass plus crimping tools for cable

Three separate work areas 
No need for changing heads
Three foot pedals, plus manual push button control
Three phase power required
Fast quiet operation

OPTIONS:
Round and Oblong punch sets.
Special bending (forming) blocks to produce single or dual bends for ground links
Crimping dies for cable lugs

Show Less

Basic unit on trolley SLB 125

The unique SLB 125 3-in-1 busbar center guarantees effortless cutting, punching and bending of copper busbars up to 125 x 13 mm (4" x 1/2"). Ideal for the switchgear work shop or at a site, the base unit transforms into a cutting, punching or bending machine within seconds.

Advantages

• Especially robust and stiff frame
• Lightning-quick tool changes with a minimum of manipulation
• Very high quality cutting, bending and punching
• The 150 bar low-pressure system ensures a long service life and very fast cycle times
• Busbars bent accurately up to 120° – very accurate reproducibility of the set angle
• Accessories for flexible busbars available

Technical specifications

Show Less

A complete cut, punch and bend system for material to: 1/2" x 4-1/2" (12 x 120 mm)

Horizontal stroke
Equipped with an adjustable bending angle indicator
Equipped with two bending dies
Die set included

* Pump is extra *

Capacity: 3/8" x 4-1/2" copper (10mm x 120mm)

A complete tabletop busbar processing system. Three seperate units to cut, punch, and bend.
Cutter unit includes vice for precision cutting and V-Blade leaving no burrs.
Bender is equipped with electrical limit switch for series production. 
Includes manual valve to direct oil flow from the pump to each individual tool. Only one tool in operation at a time. 
Tools can be easily moved on and off the table for field work if needed.

Includes:
UPH-120 Hydraulic Busbar Punch
UCH-120 Hydraulic Busbar Shear
UDH-120 Hydraulic Busbar Bender
Manual Hydraulic Valving System
10,000 PSI Hydraulic Pump With Foot Pedal Control
Portable tabletop

Show Less

Bending unit for material: 5/8" x 8" (16 x 203 mm)

Equiped with angle compensation system
Comes with 3 bending inserts
Easy operational panel
Pump Included

Width Range of cut bus bar - 50 - 180mm
Width Range of bent busbar - 50 - 200mm
Bending Angle - max 90 degrees

* Bend only *

Show Less