| |
|
|
|
CANMAG Scrap Handling Magnets
Available Dia. Sizes 28 - 83 inches
CANMAG Scrap Magnet Series are manufactured with a heavy-duty cast steel shell, Manganese steel bottom plate for extra protection. Fully protected terminals with protective lid and plug in leads. Wound with a deep field aluminum coil (optional copper coil available) for operation on 230 volts DC. Also available by special order - Scrap Magnets operating off 24 Volt AC power supply.
Supplied complete with high quality alloy chains and connectors.
CANMAG LRH7 28” / 710 mm - min. 3kW required
CANMAG LRH9 36” / 915 mm - min. 4kW required
CANMAG LRH10 40” / 1000 mm - min. 6.5kW required
CANMAG LMR46 46” / 1190 mm - min. 7.5kW required
CANMAG LMR52 52” / 1320 mm - min. 12kW required
CANMAG LMR59 59” / 1500 mm - min. 12kW required
CANMAG LRH67 67” / 1700 mm - min. 15kW required
CANMAG LRD72 72” / 1800 mm - min. 24kW required
CANMAG LRD78 78” / 1980 mm - min. 28kW required
CANMAG LRD83 83” / 2110 mm - min. 36kW required
 Download CANMAG Brochure
 See the CANMAG in action
|
|
 |
Dynaset Hydraulic HMG Generators
For 230 volt DC to your scrap magnet
For use with hydraulic excavators we recommend our hydraulic driven DYNASET magnet power and control system for 230VDC as described on the brochure below. It is sold as a complete package i.e. generator, control, pressure compensator, solenoid valve, priority valve, and push buttons. The only extras required would be magnet cable for running up the boom, plus necessary hydraulic hoses from the excavator to the DYNASET (usually two) and miscellaneous wiring to complete the installation. We can also provide complete installation services for the DYNASET.
Models include:
DYNASET HMG 3 KW, requires 5 GPM (18lpm)
DYNASET HMG 6 KW, requires 8.5 GPM (32lpm)
DYNASET HMG 10 KW, requires 12 GPM (46lpm)
DYNASET HMG 12 KW, requires 15 GPM (56lpm)
DYNASET HMG 15 KW, requires 18 GPM (68lpm)
DYNASET HMG 20 KW, requires 25 GPM (95lpm)
DYNASET HMG 30 KW, requires 32.5 GPM (123lpm)
**Recommended flow at approx. 3050psi**
Download Dynaset HMG brochure
Dynaset Installation Movie
|
|
 |
SKID-MAG SCRAP MAGNET SYSTEM
Suitible for all Skid Loaders with case drain
Skid-Mag System comes equipped with a CANMAG LRH9 28-inch aluminum wound heavy duty circular scrap magnet with chains, etc.
Equipped on the mainframe is a 5.5 KW Generator, which creates 5500 watts, sending 230 volts DC power to the magnet. The Generator is also equipped with a 115-volt single-phase outlet, which can be used for plugging in hand tools on site when the Generator is activitated.
It is also equipped with a universal quickattach back plate suitable for many Skid Loaders.
A mobile remote control box is standard equipment on the Skid- Mag. This remote box is equipped with a clip on the back side of the unit for operator convenience. It is designed to attach to the mounting bracket provided with the unit. This remote box sends a strong signal to the receiver located in the electrical box located on the mainframe. This remote is designed to activate and deactivate the power to the magnet from the Skid Loader or from a short distance from the unit, when the auxiliary hydraulics on the unit are engaged.
Download Skid Mag Brochure
|
|
 |
CANMAG Mill Magnets
Copper or Aluminum wound coils
CANMAG Extra Heavy Duty Cast Steel Mill - Round Magnets & Rectangular Magnets
Copper or Aluminum wound coils as standard design, available with HOT work bottom plates for severe mill applications
High lifting capacities with 230VDC standard, available with HOT work bottom plates
Applications Include:
Any Mill Application, Slab Turning, Hot Slab Handling (hot work construction), Hot Billet/Bloom Handling (hot work construction), Hot Structurals (hot work construction)
|
|
 |
The H-MAG
The Original Hydraulic Magnet
The GENSCO H-MAG is a combination of a scrap handling magnet with power supply installed in a rugged case on the magnet. A suitable hydraulic circuit, in terms of flow and pressure (and return line) is connected to the magnet. Most often a bucket / hammer or auxiliary circuit is readily available on the boom or stick. No electric line goes to the magnet and there is no installation required in the machine. Breaking the hydraulic flow through the valve begins an automatic drop circuit through electronic circuitry located within the enclosure.
The advantage of the systems is that almost no installation is required on the machine, with no separate electric controls and switchgear. The magnet with power unit can be very quickly disconnected freeing up the machine for other duty – and / or moved to another machine. A single system could then be quickly available for different users and sites within the company.
For companies with a fleet of machines, the hydraulic magnet offers a great deal of flexibility and efficiency. For example, companies in the rental industry, demolition and specialty contracting firms, transfer stations, railways and ports who may have a limited requirement for a magnet will find this new product ideal for their operations. Available sizes: 36", 40", 46" & NOW 52"
Download the HMAG brochure
See the GENSCO HMAG in ACTION!
|
|
 |
Gensco Diesel Driven Magnet Systems
Available in sizes 5kW - 40kW
GENSCO manufactures a complete PTO style magnet generator systems for 230VDC in a variety of sizes, powered by a diesel/gasoline engine, complete with a high quality magnet controller with lift drop switch, DC generator, fully assembled and wired, mounted on a common heavy steel frame and base. Genset is ready to install on or next to any size carrier.
Diesel Driven Models include:
5 kW DC System c/w 17HP Kubota Diesel engine, etc.
7.5 kW DC System c/w 17HP Kubota Diesel engine, etc.
10 kW DC System c/w 25HP Kubota Diesel engine, etc.
15 kW DC System c/w 40HP Kubota Diesel engine, etc.
20 kW DC System c/w 40HP Kubota Diesel engine, etc.
25 kW DC System c/w 40HP Kubota Diesel engine, etc.
30 kW DC System c/w 40HP Kubota Diesel engine, etc.
Magnet Accessories
Gensco stocks all the components necessary to belt drive or replace your current DC system. Accessories include: Generators, Rectifiers, Magnet Cables & Connectors, Controls, Switchgear and more!
|
|
|
|
|
