Gensco Equipment
     
Subscribe to the GENSCO Email Newsletter:
Used  Equipment



Used Scrap Magnets
Circular Scrap Magnet 230V DC

Rebuilt NEC 67 circular scrap magnet
Diameter: 67" (JTBD) c/w lifting chains
230V DC - 110 Cold Amps, requires 25kW magnet generator
Weight: 6900 lbs
Price: $ 13,500 USD + freight (90 day warranty)






Deltax 300LS Alligator Shear
c/w 12 inch blades

Rebuilt DELTAX model LS300 hydraulic alligator scrap shear
c/w 12" (300mm) cutting blades, gaurd over cutting head,
10HP motor, foot pedal control, 230V three phase required, etc.
Price: $ 7450.00
90 day warranty - Ref. J.7764






Cable Stripping Machine
Model CS-201 - cap to 4.5 inch OD

CS-201 - Heavy duty, production cable stripping machine for all scrap operations. Capacity 1/16” to 4½” (1.5-115 mm) diameter. Two stripping areas.  Main cutting head with upper and lower cutting blades, plus secondary cutting head for smaller wires.  All fully adjustable. Full forward and reverse, plus automatic safety braking system.  Operates at 110 feet/minute (35 M/minute) for heavy tough wire and cable including most high voltage cable.  Weighs 780 lbs (355 kgs)
Electric Requirement:  3 HP, 3 phase 220 or 575 volt 60Hz
Machine Dimensions:
Length: approx 30”  /  760 mm
Width:  approx 29”  /  730 mm
Height: approx 47”  /  1200 mm
Weight:: approx  780 lbs  /  355 kgs
Price: $ 4,900 USD 90 day warranty






Rigby Alligator Shear
c/w 24 inch blades

Rebuilt RIGBY model 24 hydraulic alligator scrap shearm c/w 24" (600mm) cutting blades, gaurd over cutting head, 10HP motor, foot pedal control, 230V three phase required, etc.
Price: $ 9,500 USD
90 day warranty






Rigby Alligator Shear
c/w 19 inch blades

Rebuilt RIGBY model 19 hydraulic alligator scrap shear c/w 19" (483mm) cutting blades, gaurd over cutting head, 10HP motor, foot pedal control, 230V three phase required, etc.
Price: $ 8,500 USD
90 day warranty






Cable Stripping Machine
ELDAN model M3 - cap. to 3inch OD

Rebuilt ELDAN model M3 - Heavy duty, production cable stripping machine for heavily insulated and rugged cables. Capacity 1/16” to 3” (10-75 mm) diameter. Main cutting head with 2 large feed rollers, wedge cutting blades, plus cleaning combs.  All fully adjustable. custom dies for cable feed entry, plus automatic safety braking system.  Operates at 100 feet/minute (30 M/minute) for heavy tough wire and cable. Weighs 1350 lbs (750 kgs)
Electric Requirement:  10 HP, 3 phase 230 volt 60Hz
Machine Dimensions:
Length: approx 47”  /  1200 mm
Width:  approx 20”  /  500 mm
Height: approx 47”  /  1200 mm
Price: $ 7,900 USD 90 day warranty






Cable Stripping Machine
ELDAN model 3 - cap to 3inch OD

ELDAN model No.3 - Heavy duty, production cable stripping machine for heavily insulated and rugged cables. Capacity 1/16” to 3” (10-75 mm) diameter. Main cutting head with 2 large feed rollers, wedge cutting blades, plus cleaning combs.  All fully adjustable. custom dies for cable feed entry.  Operates at 100 feet/minute (30 M/minute) for heavy tough wire and cable. Weighs 1350 lbs (750 kgs)  Electric Requirement:  10 HP, 3 phase 460 volt 60Hz
Machine Dimensions:
Length: approx 47”  /  1200 mm
Width:  approx 20”  /  500 mm
Height: approx 47”  /  1200 mm
Price: $ 6,800 USD 90 day warranty






Galland Henning Briquetting Machine
Rebuilt 30DC Baler/Briquette Press

GALLAND HENNING HEAVY DUTY BRIQUETTER
Model: 30DC – Dual Compression Baler with Side Eject
12” x 12” x var. bale/brick
Box size: 30”  x 30” x 72”
Charge Box size: 30 cu. feet
50 HP (230V-460V/3/60 hZ.)
Cycle time (dry): 32 seconds
Avg. Bale Weights:
Steel Clips – 110 lbs
Copper – 160 lbs
Aluminum – 50 lbs.
*See specification sheet link below*
Asking Price: $ 85,000 USD - FOB NY
(under power)

 GH 30DC Specification Sheet





Logemann Briquetting Machine
3-Ram Baler with side eject and in-feed conveyor

LOGEMANN HEAVY DUTY BRIQUETTER c/w infeed conveyor
Model: 1212-31-SES – 3 Ram Baler with Side Eject bale discharge
Steel belted and cleated above ground infeed conveyor with chute
12” x 12” x var. bale/brick
Box size: 36”  x 36” x 72”
Charge Box size: 34” x 51”
100 HP (230V-460V/3/60 hZ.)
Cycle time (dry): 32 seconds
Avg. Bale Weights:
Steel Clips – 150 lbs
Copper – 195 lbs
Aluminum – 75 lbs.
Asking Price: $ 215,000 USD - FOB Toronto, CA
(under power)

 Photos and Specifications





ZATO Blue Whale Shear Baler
Diesel powered 800 ton shear baler

2014 Zato Blue Whale T 800D stationary logger / baler / shear (like new) Powered by a high efficiency Perkins 4/Cyl. liquid cooled, 350HP Turbo diesel engine (approx. 2000 hrs) -  automatic radio remote pendant control system, Bosch Rexroth hydrualic system with max Baler operating pressure set at 4,785psi - max Shear operating pressure set at 5,365psi, gear pumps operating at 2,600psi. Full bale and log ejection door.
Charging box size: 6.2 metres / 20.35 feet
Bale size = 32" x 24" x var (600 x 800mm)
Folding wings max force = 700 metric ton
Shear size = 800 metric ton cutting force c/w 32" blade c/w hydraulic hold down system
Pushing Ram: 200 ton
Can process up to 14 tons/hr.
PRICE: Please call






ZATO Elephant Mobile Shear
Model FC30R.III

2010 FACTORY REBUILT FC30R III HYDRAULIC SHEAR ATTACHMENT FOR SCRAP
PROCESSING COMPLETE WITH 360° CONTINUOUS ROTATION
Full details and capacities as per attached pages Approx weight without link: 2700 kgs/6000 lbs Main body fully enclosed and reinforced - Opening: 23.25 inches - Depth: 23.25 inches
Length: approx 100 inches / 2600 no link Main Cylinder: Heavy duty
large bore with tempered rod, solid with main body, certified welding
process, Supplied with integrated spool type speed valve for increased speed through regenerative hydraulic circuit - End cap wrapped and tempered - Precision designed single side slide puck system for perfect alignment and control of cutting stroke Approximate cutting force at 4900 PSI / 350 BARS: 700 tons (US)
Recommended min. excavator weight Boom mount: 17 Ton / 34,000 lbs
Price: $ 32,000 USD






Belt Drive DC Generators - 230V DC
5kW to 25kW

BALDOR 7.5kW 230V DC - 2500RPM generating motor
32.6 AMPS - 90 day warranty
Price: $ 1,900 USD

BALDOR 10kW 230V DC - 2500RPM generating motor
43 AMPS - 90 day warranty
Price: $ 2,450 US

OHIO OPT25-16 18kW 230V DC - 1800RPM generating motor
78 AMPS - 90 day warranty
Price: $ 3,900 USD

BALDOR 20kW 230V DC - 1800RPM generating motor
87 AMPS - 90 day warranty
Price: $ 4,900 USD




 

   

©2012 Gensco Equipment (1990) Inc.

i